More attempts at cutting a solder paste stencil with a rotary engraver.

Here's how to supposively "disable FLoC" in django using middleware.

I decided to see how good or bad the Dahlgren System 300z is at engraving by doing a test cut for a solder paste stencil.

When using dokku the static files (css, js, etc..) are typically served by nginx but by default

SSH drops idle connections after 30 seconds or something with the error client_loop: send disconnect: Broken pipe. Here's how to fix that...

High resolution encoders are expensive... old computer mice are dirt cheap.

Previously you could install and update the toolchain for arm cortex R and M cpu's using apt by just adding the ppa and doing a normal apt install, but that ended for whatever reason.

Django ignores your template settings by default when rendering forms.

Every once in a while a linux kernel update will fail to install with an error like update-initramfs: failed for /boot/initrd.img...

Originally my engraver used a Teensy 3.2 and Arudino but now it uses an Stm32 and Zig!